START-UP INSTRUCTIONS
1. Install the SAO dispenser as per
INSTALLATION INSTRUCTIONS
above.
2. Make sure the power cord is plugged into 120V power outlet (220V where applicable).
3. Ensure
COLD WATER IN
hose is attached to open faucet or permanent cold water source with a flow minimum of 4L/minute.
4. To start, press
FLOW
switch to
ON
position.
5. When
SYSTEM READY
indicator is
GREEN
, dispense into mop bucket, auto scrubber, carpet extractor or spray bottle.
6. Shut dispenser off when not in use by pressing
FLOW
switch to
OFF
position. To disconnect, ensure
FLOW
switch is in
OFF
position before removing plug from the outlet.
7.
Ensure water supply to the dispenser is turned off when not in use.
8. If you encounter a red light with initial installation you may need to turn the device on and off multiple times as it sets itself.
Once set and installed it will charge thereafter.
NOTE:
If you still get a red light, check that the cold water is turned on. Check that there are no kinks in the line to allow
uninterrupted flow of water. Also check that the cartridge is in properly.
Testing was performed using a duty cycle of 5 minutes on, 25 minutes off, with a maximum 60 minutes per 24 hour periods.
Do not exceed this duty cycle.
GROUNDING INSTRUCTIONS –
This appliance must be grounded. In the event of a malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord
having an appliance-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is
installed and grounded in accordance with all local codes and ordinances.
WARNING: Risk of Electric Shock. Disconnect power before servicing.
Never block or restrict SAO SOLUTION OUT hose with nozzle, clamp or shut-off valve. This may damage unit and will void
the warranty. Always use FLOW ON/OFF switch to start or stop flow of Stabilized Aqueous Ozone.
WARNING:
Improper connection of the appliance-grounding conductor can result in a risk of electric shock. Check with a
qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify
the plug provided with the appliance; if it will not fit the outlet, have a proper outlet installed by a qualified technician.
This appliance is not intended for use by children or those with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
07/2020
SAO DISPENSER
START-UP GUIDE
www.tersano.com
1-800-727-8835
US and International Patents and Patents Pending.
*Above diagram is a representation only
OFF
ON
COLD WATER IN
SAO SOLUTION OUT
Desiccant Filter
FLOW OFF/ON
switch
Performance Indicators
Service Light
QUICK
DISCONNECTS
SAO DISPENSER
CARTRIDGE
Screen
Filter
3.8cm
1.5”
57.15cm
22.5”
10.8cm
4.25”
Pressure Regulator
COLD WATER IN
to cartridge
(attach to cold water supply)
SAO SOLUTION OUT
hose
(182.88cm/72
”
)
COLD WATER IN
hose
(121.92cm/
48”
)