TERRY Lifestyle 3.6m, User Manual

Page: 7 / 28

CONTROLS AND OPERATION
There are two wall mounted call stations, one at each level (see
illustration) and a similar control station fitted in the lift car.
The lift can be isolated by using the optional remote control fob.
When the lift is isolated none of the control stations will function.
The call and control stations can only be activated by using the
remote fob. When the lift is activated, the coloured indicator lights
in the car will illuminate.
The lights in the car will switch on automatically when any call or
control button is pressed and will automatically turn off after a few
minutes.
General operation
Call the lift by pressing the up arrow or down arrow button on
either call station and wait for it to stop. The door will unlock and
can then be manually opened. Press and release UP or DOWN
on the control station for the lift to travel uninterrupted to the
next floor. If the lift does not start, check that the door is properly
closed and try again. Always close the door after using the lift.
Leave the lift downstairs whenever possible.
STOP
UP
DOWN
DOOR
7
Wall mounted call station
Optional remote
isolate fob