TerraWave Solutions
®
3400-3600 MHz 10 dBi Omnidirectional Antenna with N-Style Jack Connector
Installation Information for M35100O10006
www.terrawave.com Email: [email protected] Phone: 210-375-8482 Fax: 210-375-8482 10521 Gulfdale, San Antonio, TX 78216
Antenna cap
Joint sheath
Pressure plate
Clamp
Cable
Installation Instructions:
1. Assemble the antenna by placing the antenna’s joint sheath between the pressure plate and clamp using a
wrench.
2. Install this antenna assembly vertically to the mounting pole. Please note that it is not recommended to install the
antenna on a pole with a diameter other than specified.
3. It is recommended to wrap the connector with weather-proof adhesive tape after connecting to the device or
cable assembly.
Other Recommendations:
1. Do not attempt to carry out the antenna installation during inclement weather.
2. Make sure the antenna is installed in a safe and suitable location that is clear from any power lines.
3. Do not attempt to install the antenna on a pole of a diameter other than specified.
