TerraWave Solutions
®
2.4 GHz 10 dBi Yagi Antenna
Mounting Bracket Information for T24100Y13602, T24135Y13602 and T24150Y13602
Installation Instructions:
•
By default, the antenna is in vertical polarization mode.
•
For horizontal polarization installation, unscrew the antenna from the L-bracket
and rotate 90 degrees. Screw the antenna back to the L-bracket. Be certain
that the polarization arrow is parallel to the ground when installed.
•
Mount the antenna to the mast with the U-bolt and hex nuts.
•
Adjust the antenna angle until the signal reception is optimized.
•
Fasten all screws.
Note: Mast mount diameter:
≤
2”
10521 Gulfdale, San Antonio, TX 78216 www.terrawave.com www.tessco.com/go/terrawave Phone: 800-472-7373 Email: [email protected]
