TerraView RangePro X8, Safety Manual

Page: 13 / 21

Takeoff 13
RangePro X8 Safety Manual 4 •
Figure 2. Clear zone around UAV
Takeoff
Do the following:
1.
Make sure the RangePro X8 is in a good takeoff location (free of debris and a safe distance from objects
and structures like buildings and trees. TerraView recommends a 30-foot or 9-meter radius around the air-
craft) for takeoff and landing (see
figure 2 ). Remember that this area will probably be the return-to-home/
return-to-launch (RTH/RTL) and landing location.
2.
We also recommend using a flat and level surface for takeoffs and landings. Use of a takeoff mat may be
needed for dusty sites.
3. Be aware of possible strong magnetic interference when choosing your takeoff location. Vehicles, buildings,
dumpsters, street lights and even the rebar in the concrete you are standing on may cause issues. (Remem-
ber, this area will be the RTH/RTL location as well.)
4. Clear the area of personnel and notify participants of your intention to take off.
Post-flight—Inspecting and Storing the Battery
Before and after every flight:
1. Check each cell and the battery frame for dents, punctures, or cell puffing.
To avoid damaging the RangePro X8, verify that there is sufficient clear space (no loose
debris on the ground) around the UAV (TerraView recommends a 30-foot or 9-meter radius
around the aircraft, as shown in
figure 2 on page 13) for takeoff and landing.
CAUTION