TTSolo1-NL
7
Installation Instructions for Windows NT 4.0. (min. ServicePack 3).
Please ensure that you are logged on as Administrator when installing the drivers.
Install the soundcard as described in the Hardware Installation chapter. Insert the CD-ROM in
your CD-ROM drive. Switch to the folder
<CD>:\DRIVERS\WINNT
and start the program
SETUP.EXE.
Follow the instructions of the installation program.
Hardware Installation.
Before installing the sound card, please take note of any special points pertaining to the confi-
guration of your computer. Also refer to the handbook of your computer and other expansion
cards for their settings.
Please observe the following instructions to ensure a trouble-free installation.
If difficulties arise nevertheless, please reread the relevant chapter in this handbook carefully.
WARNING! – Before opening the case, unplug the mains cable from the wall socket as
well as from the PC.
ESD (electrostatic discharge) may damage disk drives, add-on boards and other components.
The steps described should only be carried out at an ESD workstation. If one is not available,
you can prevent electrostatic discharge by wearing an antistatic arm band and holding it to a
metal part of the system housing.
Please note that opening the housing in no way breaches the conditions of guarantee provided
that you do not carry out any modifications to the hardware components inside. Any unauthori-
zed expansion of the PC may however affect your rights under the terms of the guarantee. Any
such work should be discussed beforehand with your specialist dealer.
Now it’s time to arm yourself with a Phillips screwdriver.
And here’s what to do, step by step:
• Turn off your computer and any other peripheral devices. Leave the AC cord connected for the
time being, so that your computer is still grounded.
• Touch the metal chassis at the rear of the PC to ground yourself and discharge static. Now un-
plug the cord from the AC mains socket.
• Remove the cover from the case of your PC.
