16
SpeakerSystem
SubSession
English manual
Saftey Instructions
1. Make sure the amplifier is properly ventilated from above and below. Do not install the
amplifier in a confined space such as a bookcase or similar unit.
2. Keep the amplifier away from heat sources.
3. Don’t use the amplifier or loudspeakers near water.
4. Avoide abjects or liquids getting into the amplifier or loudspeakers.
5. Unplug the power lead if SubSession won’t be used for a long period.
6. Avoid sustained periods of high-volume use. Due to SubSession’s low distortion you may
be listening at higher levels than you realise.
7. So not use SubSession for sustained periods at high volume with an input signal above
line level (i.e. amplified before it reaches the amplifier), as this may demage the loudspea-
ker cones.
Mains safty
1. Subsession ueses a 220-240 V AC 50 Hz mains supply.
2. If you want to change the fuse on the amplifier, replace it with the same type as stated on
the unit. A spare fuse is located below the mains socket. Access it by removing the mains
lead, and levering the fuse hold out.
3. The mains lead is fitted with a moulded, non-rewireable mains plug. If the lead or plug
become damaged, replaced it with a new mains cord assembly. Never attempt to repair or
modify the mains lead or plug.
4. Do not attempt to remove any screws or gain access inside any component of SubSession.
No user-serviceable parts are inside. For your safety, always obey the warning:
Caution – Risk of electric shock – Do not open cover
