phono PreAmp Studio USB (English)
5
Ground Wire
To prevent so-called power-line hum, be sure to use the supplied adapter. Simply plug it into
one of the audio cables (left or right) and connect your turntable's ground wire to the terminal
screw.
Technical data
·
Fast and easy USB computer connection
·
NO special driver installation needed, direct compatibility with Win 98 SE/Win ME/Win
2000/Win XP
·
Stereo input for turntables, switchable to line-in level (approx. 2 Volt/RMS - RCA/cinch)
·
Power supply from the USB computer connection
·
Input capacity adjustable in three stages (100 pF, 250 pF and 430 pF)
·
Adjustable input level (Min -> 6mVRMS/1kHz, Max -> 12mVRMS/1kHz, Line-in ->
2VRMS/1kHz)
·
Filter function with high-precision RIAA equalization (20 Hz-20 kHz /
±
0.4 dB)
·
For moving magnet (MM) cartridges and high-output moving coil (MC) systems
·
Not suited for standard MC systems
·
Harmonic distortion
<
0.007 % (5 mV)
·
Display LEDs for peak and signal
·
Signal-to-noise ratio:
>
86 dB (A)
·
EMC-conforming shielded housing
