16
PhonoPreAmp iVinyl (English)
DeNoiser
removes noise and static from the audio material.
Playback Area
The
Playback area
is located in the lower section of the
Sound Rescue
TerraTec Edition 2.1
interface. Using its features, you can record a WAV file, load a file for editing, start and stop
playback, and jump to any position in the WAV file by moving the cursor within the
Waveform
display
.
After loading a WAV file, its name and format are displayed in the
status window
below the
Analyzer
and its waveform is displayed in yellow in a normal view, meaning it is adapted to fit
within the width of the Waveform window.
The playback area of Sound Rescue
TerraTec Edition 2.0
The edited audio material can be stored offline. To this end, select the file dialog with the
button. The sampling frequency of the output file corresponds to that of the input file
(44.1 kHz or 96 kHz for .ap files). If converting these formats or converting the sampling rate,
for example, from 96 kHz to 44.1 kHz, always use a suitable, high-quality tool provided in your
editing or sound card software.
Note that the functions “Norm”, “Split”, “Track” and “CD” only work with 16-bit, 44.1 kHz wav
files. For .ap files, these functions are disabled, because the resulting file format would not be
compatible for creating audio CDs.
The Buttons and Controls in the Playback Area
File Functions
opens the “load” file dialog box
opens the “save” file dialog box
Audio Functions
normalizes the audio material to maximum loudness
splits the audio material at the current marker position
sets the marker at a position in the audio material at which a new track
most likely begins
sets the marker at the position where the loudness is at its maximum
