TerraTec Mystify 4200 (English)
11
Installing the card
1. Switch the computer off (leave the power cable connected, however, to ensure that the
computer is grounded) and remove the monitor plug.
2. Open the case. Don't forget to ground yourself before touching the old or new graphics
board.
3. Remove the old graphics board if present. First, remove the screw holding the slot plate of
the card to the case. Grasp the card by the edges and carefully pull it out of its slot. Next,
carefully insert your TerraTec Mystify 4200 into a free AGP slot and gently press it into the
slot until completely seated.
4. Replace the screw in the case to retain the graphics board and close the case.
5. Reconnect the monitor cable and switch on your PC and monitor.
