20
KOMPLEXER Manual EN
LFOs
The three LFOs (Low Frequency Oscillators) likewise have an identical layout. LFO 3,
however, has an additional Step Shape function.
Delay
- Delays application of the LFO after the key is pressed.
Fade
- Positive values cause the amplitude of the LFO to increase starting at 0, and the
LFO effect is faded in. Negative values, on the other hand, cause the LFO to have its full
effect as soon as the key is pressed, after which it is faded out.
Keytrack
- Changes the LFO frequency depending on the MIDI note.
Startphase
- Click the waveform display of the LFO and drag it to change the start phase
of the LFO. This parameter has an effect only if Clock is disabled.
Sync/Clock
- The different combinations have the following effect:
Sync Off / Clock Off - LFO of each voice runs free in phase, depends on start phase.
Sync On / Clock Off - LFO of each voice is in one phase, depends on start phase.
Sync Off / Clock On - LFO speed depends on the song tempo, LFO of each voice runs
free in phase, depends on start phase.
Sync On / Clock On - LFO speed depends on the song tempo, LFO of each voice in one
phase, independent of start phase. Phase is based on the beat position of the song.
Shape
- Sine, Triangle, Square, Saw, Random, S&H, the Step Shape can be defined by
the user. With Step Shape enabled and Clock On, particularly lively sounds can be
created and rhythmically integrated into a song.
Contour
- This parameter smooths the envelope curve of the step waveform with falling
edges.
