DVD 5.1 (English)
35
Playback of 5.1 surround sound.
Analog.
Connect the analog connections of the DVD 5.1 grouped under “5.1 Channel” to the
appropriate inputs of your surround amplifier using 6 audio cables.
Digital.
Alternatively, you can also connect the digital AC-3 output of the player to a suitable
input of your playback device. If you aren't sure which input on your amplifier is the correct
one, please consult its manual.
For your own safety.
To prevent damage to the speakers or your hearing, turn down the vol-
ume of your amplifier or TV before starting the playback. All of the devices should always be
switched off while handling the cabling.
Subwoofer
Center
Left
Right
Sur. Left
Sur. Right
Subwoofer
Center
Left
Right
AC power.
Once you've plugged everything in, you should feed the unit a bit of AC power. For once the
color isn't relevant. ;-) Switch the DVD 5.1 on and off using the power switch on the left-hand
side of the front panel.
Standby.
You can also put the player into standby mode—to “sleep”, so to speak—with the
remote control. You can then “wake” it at any time using the remote control. The player will
use several watts of power while in standby mode, however. If you don't intend to use the
player for an extended period—while you're on vacation, for example—please unplug it from
the AC outlet.