Channel search
Before starting the channel search, please select the “Region” and the “Transponder list”.
Under “Configuration”, specify the station categories you would like to include in your search
and whether the found stations should then be sorted alphabetically.
We recommend not changing the “Tuning parameters” to ensure that you find all available
stations.
If you do not want a comprehensive search, you have the option of restricting it here. If you
only intend to search for a certain polarity, then select it in the “Polarity” field. The borders
indicate the range above or below the frequencies in the transponder list that should be
included in the search. Narrowing the definition of the range will speed the search operation.
Searching will not always be successful without a certain tolerance, however. Finally, the
“Step size” field specifies the steps with which the frequency range should be searched.
Once all of the settings have been made, start the search. This may take several minutes, but
as a rule it is only necessary to perform this operation once. The status bar at the bottom of
the window provides information on the progress of the search.
Cinergy 1200 DVB-T (English)
17