Safety note:
Disconnect the power cord from your computer’s power supply and the electric socket before
opening the enclosure!
A free 5 ¼"expansion slot is required for the installation.
For installing the Cameo Connect, remove one of the 5,25" front brackets of your computer's
enclosure (A). Existing shielding sheet metal in the expansion slot must also be removed.
Push the Cameo Connect module into the free slot (B).
d
e
Attach the front module to the computer's enclosure, using the included screws.
Connect the internal FireWire™-connector of your Cameo DV PCI-card to the connector of the
Cameo Connect front module as shown in the illustration below, using the included (short)
FireWire™-cable.
2
Cameo Connect (english)