Advanced Standalone Mode for EWS MIC 2/8 (96kHz or ADAT Firmware) and PHASE 88 Rack FW
2. MIDI Remote Mode
With the MIDI Remote Mode, the digital hardware mixer and the
signal router can be controlled in real time with a MIDI fader box or
any other MIDI controller that can send MIDI control changes and is
connected to MIDI In port 2. The MIDI settings used by the device
are defined by the Control Panel via 1394. The MIDI channel that is
monitored by the device is specified by a combo box in the control
panel.
The MIDI controller numbers are attached to the mixer faders by right
clicking on them. MIDI controller numbers can only be set if there is a valid
MIDI channel set.
The MIDI controller numbers for the digital
signal router are defined by right clicking on the
combo boxes in the default routing dialog. MIDI
controller numbers can only be set if there is a
valid MIDI channel set.
