TerraMaster D2-310, User Manual

Page: 2 / 8

Rear Cover Illustration
1. Appearance
Panel Illustration
No. Description Item
NO. Item Description
①
⑦
②
③
④
⑤
⑥
Rotary Switch
(HDD1/HDD2)
Hard Drive
Indicators 1 & 2
Power Indicator
Power Button
Used to switch RAID modes.
After switching the array mode, you need to press the reset button
to make the newly set array mode take effect.
Reset Reset the device to match its current hardware settings
Off: Hard drive not detected or hard drive in sleep mode
Green: Hard drive is ready
Flashing Green: Reading/writing
Flashing Red: Hard drive fault or array damage
Note: During the process of data recovery on RAID 1 mode, one
hard drive indicator flashes green while the other flashes yellow.
On: Powered On
Off: Powered Off
Short press to power on; long press (for 3 seconds) to power off
USB Type-C Interface Data transmission interface
Power Jack
DC 12V power input
Warning: Only use the power adapter originally supplied with
your device. Use of any other adapter may result in damage.
①
②
③
④
⑤
⑥
⑦
1
Model:D2-310