4
Assembly
1. Attach the brush to the brush mount as shown using
two 5/16" flange nuts. Torque to 8 ft-lb.
2. With the vertical part of the mower mount against
the vertical face at the rear of the tractor, use a
1/2" x 1-1/4" flange bolt (B) and 1/2" flange nut (C) to
fasten to the hole of the rear hitch as shown. Torque
to 37 ft-lb.
3. Connect brush mount assembly to mower mount
using two 3/8" x 2" carriage bolts (D), 3/8" washers
(E), star washers (F) and lock knobs (G). Install 3/8"
lock nuts (H) on the ends of the threads to prevent
knobs from vibrating off.
A
B
C
D
E
F
G
H
