3
3. Install the 8 ft. wire harness (C) in place of your
switched harness following the same route. In the
event you choose to continue to use the switched
harness, make sure the switch is in the "on" position.
4. Connect the wire extension/switch harness to the fuse
battery lead or fused 12v plug in adaptor supplied with
your sprayer.
Specification
Max Amp…………………….15 amp
Required Batteries
Remote……………………….27A -12v
Maximum Range……………..100ft unobstructed*
*Range will vary depending on obstacles and battery life.
Transmitter Compliance Statement:
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Transmitters comply with all United States and Canadian
legal requirements as of the date of manufacture.
No warranty is made that they comply with all legal
requirements of any other jurisdiction. If transmitters are to
be used in another country, the importer must determine
compliance with any local laws and regulations which may
differ from United States and Canadian requirements prior
to use.
5. Attach control FOB (B) to key chain using the attached
clamp..
Note: the receiver box is epoxy sealed for weather
resistance. It is recommended that you wipe off the
receiver after spraying to help protect the integrity
of the sealer. The control FOB is NOT waterproof.
CAUTION: Avoid damage! Avoid damage
to wiring. Make sure hood does not close
on wiring harness. Keep wiring harnesses
away from all moving parts and hot
surfaces.
WARNING: Do not deploy this item for
emergencies involving fire, security and
safety of life.
C
