14
Auto Charging Docking Station:
Recharger Display and Control Panel:
Overall Display
Function Instructions
1
．
LED decorative light (a little essence can be placed above)
2
．
Decorative light switch
3
．
Power LED
4
．
Charging indicator
5
．
Signal transmitting
6
．
Charging positive pole
7
．
Charging negative pole
8
．
Charging power DC socket
Using Method & Functional Status of the Docking station
:
No.
Function Guide
Function Information
1
LED
decorative
light
Turn on the decorative light to activate the atmosphere, and place in the glowing
center of the light a little essence, which will give off charming aroma after
heating.
2
Decorative
light
switch
Press the switch to turn on/off while the decorative light is on.
3
Power LED
The Power LED will light when the Docking Station is connected with the power,
or turn off if not connected.
4
Charging indicator
The indicator will flicker while the recharger is connected with the cleaner.
5
Signal transmitting Transmitting signal is the only way to lead the cleaner to return the Docking
Station for charging, so the signal transmitting position should be clean for long
without any obstacle on it.
6
、
7 Recharging
positive & negative
electrode
The electrode and that of the Cleaner are connected to charge under contact
mode, so the position should be clean without any obstacle on it while using, or
there will be impact to the charging.
8
Charging
power
DC socket
The power DC socket, called recharger for short, used to connect output terminal
DC24V of the adaptor, is the charging transit station between the Cleaner and
adaptor, so the recharger should be placed against the wall firmly and the
adaptor cable should be away from the recharger, or the Robot may have impact
and winding during cleaning.
:
Some essence may damage the plastic surface, so please make purchase and use after consideration.
