1
DVB-S/S2 & DVB-T/T2/C to DVB-T transmodulators
tdx410C, ttx410C
EN
1. Product description
DVB-S/S2 (tdx410C), DVB-T/T2/C (ttx410C) to DVB-T transmodulators (in the text - modules) designed for digital
transmodulation with Transport Stream Processing (of TV or Radio programmes) issued from FTA (Free to air) or encrypted
digital reception; in case of encrypted signal, a CAM (Conditional access module) containing the operator's smart card must
fitted in the slot. The streams can be viewed via Web interface using video player plug-in (VLC).
Modules are intended for indoor use only.
2. Characteristics
Input
: One DVB transport stream (MPTS - Multiprogram Transport Stream).
Output
: MPTS stream with up to 5 PCR restamped services (TV or Radio programs) or Transparent mode of MPTS
stream.
• Web interface for configuration and setting.
• SNMP (simple network management protocol) agent for monitoring and alarms.
• PID filtering (up to 31 PID’s).
• PSI/SI (Program-specific information) parsing.
• PAT(Program association table), NIT (Network information table) and SDT (Service description table) table
regeneration.
3. Safety instructions
Installation of the module must be done according IEC60728-11 and national safety standards.
Any repairs must be made by qualified personnel.
Do not expose this module to moisture or splashing water and make sure no objects filled with liquids, such as vases,
are placed near or on the unit.
Avoid placing the module next to heat sources such as central heating components or in areas of high humidity.
Keep the module away from naked flames.
If the module has been kept in cold conditions for a long time, bringing it into a warm environment may cause
condensation, so allow it to warm up for no less than 2 hours before plugging into the mains.
Ventilation should not be impeded by covering the module, such as newspapers, table-cloths, curtains etc.
Mount the module in a vertical position only. If installing in a 19” rack system additional forced air cooling fans may be
required (see table "Technical specifications" - operating temperature range).
Always allow 10 cm of free space from the top, front and bottom of the unit to enable any heat to be dissipated.
Vers. 1.06
