Terra SRM940, Manual

Page: 4 / 5

Marking: v.0 Marking: v.1
User
Band
(UB)
PIN
Code
Bandwidth,
MHz
Central frequency,
MHz
Bandwidth,
MHz
Central frequency,
MHz
EN50494 EN50607 EN50494 EN50607
UB0
UB1
1 40 1210 1210 40 1210 no
UB2 2 40 1420 1420 40 1420 no
UB3 3 40 1680 1680 40 1680 no
UB4 4 40 2040 2040 40 2040 no
UB5 5 40 1284 1284 40 no 985
UB6 6 40 1516 1516 40 no 1050
UB7 7 40 1632 1632 40 no 1115
UB8 8 40 1748 1748 40 no 1275
UB9 9 40 no 970 40 no 1340
UB10 10 40 no 1010 40 no 1485
UB11 11 40 no 1050 40 no 1550
UB12 12 40 no 1090 40 no 1615
UB13 13 40 no 1130 40 no 1745
UB14 14 40 no 1170 40 no 1810
UB15 15 40 no 1330 40 no 1875
UB16 16 40 no 1370 40 no 1940
Marking: v.2
Bandwidth,
MHz
Central frequency,
MHz
EN50494 EN50607
46 1210 1210
46 1420 1420
46 1680 1680
46 2040 2040
46 1006 1006
46 1057 1057
46 1108 1108
46 1159 1159
46 no 1261
46 no 1312
46 no 1363
46 no 1471
46 no 1522
46 no 1573
46 no 1624
46 no 1731
Table 1
4
C onfiguration
The default setting of the device can be changed using dedicated programmer and software
This multiswitch can be configured:
1. Up to 32 User Bands (UB) per pair outputs (total 64 UB) for use with STBs supporting DiSEqC commands according
to standard EN50607 (dSCR).
2. Default settings Dynamic mode can be changed to Static mode .
3. Default setting Satellites A/B/C/D can be changed to Satellites A/B (for installation 2 Quattro LNBs (SAT A/B in the
case Quattro LNB IF range input mode).
PC Windows software can be free downloaded from www.terraelectronics.com .
Output configuration must be the same per pair of outputs, but can be different in others pairs. Each pair of outputs is
configured separately. Pay attention to the numbering of outputs.
See programmer user manual for more information.
Recommended accessories
1. Power supply PS202F
2. dSCR power inserter PI012
3. Multiswitch programmer PC102W
This product complies with the relevant clauses of the European Directive 2002/96/EC. The unit must be recycled or discarded according to applicable local
and national regulations.
Equipment intended for indoor usage only.
Functional grounding. Connect to the main potential equalization.
This product is in accordance to following norms of EU: EMC norm EN50083-2, safety norm EN IEC62368-1, RoHS norm EN50581.
This product is in accordance with Custom Union Technical Regulations: “Electromagnetic compatibility of technical equipment“ CU TR 020/2011,
“On safety of low-voltage equipment“ CU TR 004/2011.
This product is in accordance with safety standard AS/NZS 60065 and EMC standards of Australia.