5
C
onfiguration
The default setting of the device can be changed using dedicated programmer and software.
These multiswitches can be configured:
1. Up to 32 User Bands (UB) per pair outputs (SRM561- total 96 UB, SRM581- total 128 UB) for use with STBs supporting
DiSEqC commands according to standards EN50494/EN50607 (SCR/dSCR).
2. Default settings
Dynamic mode
can be changed to
Static mode
.
3. Default setting Satellite A/B can be changed to C/D (see
Application diagrams
for installation 4 wideband LNBs
(SAT B in the case Quattro LNB IF frequency range input mode).
PC Windows software can be free downloaded from
www.terraelectronics.com
.
Output configuration must be the same per pair of outputs, but can be different in others pairs. Each pair of outputs is
configured separately. Pay attention to the numbering of outputs.
Some possible outputs pair configurations shown in Table 3.
Recommended accessories
1. Power supply PS202F
2. Power inserter PI012
3. Multiswitch programmer PC102W
Table 3
Input mode
Output 1
Output 2
Wideband LNB
LO=10410 MHz. Other settings default.
LO=10410 MHz. Other settings default.
Wideband LNB
8 SCR/dSCR UB + up to 24 dSCR UB + Terrestrial TV
Up to 24 dSCR UB + Terrestrial TV
Quattro LNB*
8 SCR/dSCR UB + up to 24 dSCR UB, PIN protected
+ Terrestrial TV
Legacy + Terrestrial TV
Wideband LNB
Static mode (up to 32 converted transponders) +
Terrestrial TV
Up to 32 converted transp
Terrestrial TV
Wideband LNB
8 SCR/dSCR UB + Static mode (up to 24 converted
transponders) + Terrestrial TV
Up to 24 dSCR UB + Terrestrial TV
* Input frequency range 950- 2150 MHz. Inputs V SAT A→V,Lo, H SAT A→H,Lo, V SAT B→V,Hi, H SAT B→H,Hi.
Legacy mode output level
78 dBµV (typical).
This product complies with the relevant clauses of the European Directive 2002/96/EC. The unit must be recycled or discarded according to applicable local
and national regulations.
Equipment intended for indoor usage only.
Functional grounding. Connect to the main potential equalization.
This product is in accordance to following norms of EU: EMC norm EN50083-2, safety norm EN60065, RoHS norm EN50581.
This product is in accordance with Custom Union Technical Regulations: “Electromagnetic compatibility of technical equipment“ CU TR 020/2011,
“On safety of low-voltage equipment“ CU TR 004/2011.
This product is in accordance with safety standard AS/NZS 60065 and EMC standards of Australia.
