3
Stand-alone headend S2Cbox
1.
Product description
Device is a 16 channels transmodulator with DVB-S/S2 input and DVB-C output. It has 4 main and 2 auxiliary
SAT ports for connecting SAT signal. Integrated RF multiswitch allows connection 16 demodulators to SAT
ports. Demodulated transport stream reaches processor, which filters services, modifies SI (Service
Information), generates NIT (Network Information table), LCN (Local Channel Number), restamps PCR
(Program Clock Reference). Then transport stream is forwarded to 16 QAM modulators, which produces 16
independent DVB-C RF
signals.
All of the configurations can be changed by using the Web Interface.
S2C16P
version of transmo
dulator with redundant power supply (PS) has two PS to increase reliability of
supply voltages.
Transmodulator can be used as a stand alone device.
The product is intended for indoor usage only.
2.
Safety instructions
Installation of the transmodulator
must be done according
IEC60728-11 and national safety standards.
Transmodulator is powered from mains 230 V~. This voltage is dangerous to life.
Any repairs must be done by a qualified personnel only.
To avoid the electric shock follow these instructions:
● Do not plug transmodulator into the mains supply if the power cord or plug is damaged.
● T
o disconnect the transmodulator
from the mains completely, disconnect plug from mains socket
.
● The mains socket must be easily accessible.
● The transmodulator shall not be exposed to dripping or splashing water and no objects filled with
liquids, such as vases, shall be placed on it.
● Avoid placing device next to the central heating components and in areas of high humidity.
● No naked flame sources, such as lighted candles, should be placed on transmodulator.
● If the device has been kept in cold conditions for a long time, keep it in a warm room no less than 2
hours before plugging into the mains.
● Do not insert any objects into ventilation openings
.
● The ventilation should not be impeded by covering the transmodulator with items, such as
newspapers, table-cloths, curtains
.
● Mount the
transmodulator
on not flammable wall or in not flammable installation box in vertical
position with power supply located on the right.
