2
1. IMPORTANT SAFETY PRECAUTIONS INFORMATION
READ THE FOLLOWING WARNINGS BEFORE YOU USE YOUR DEVICE
To avoid electric shock and prevent fire follow instructions
:
● Operate the unit only within mains voltage range defined on external power supply.
● To disconnect the modulator from the mains completely, disconnect external power supply from the mains socket.
● The mains socket must be easily accessible;
● Disconnect the external power supply from the mains when the unit is not in use for long periods of time or during
storms.
● Any repairs must be done by a qualified personnel.
● The modulator shall not be exposed to dripping or splashing water and no objects filled with liquids, such as
vases, shall be placed on it.
● Avoid placing the modulator next to central heating components and in areas of high humidity.
● Do not plug/unplug the external power supply with wet hands.
● No naked flame sources, such as lighted candles, should be placed on the modulator.
● If the modulator has been kept in cold conditions for a long time, keep it in a warm room no less than 2 hours
before plugging into the mains.
● Do not insert any objects into ventilation openings.
● The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers,
table-cloths, curtains.
● Mount the modulator in vertical position with RF connections underneath.
● From top, front and bottom of installed modulator must be at least 10 cm free space.
Installation / Storage
● This unit contains high precision pieces of electronics. To ensure optimal performance and avoid damage, do
not store it in any location where it may collect dirt, duct, lint, etc. Do not expose it to extreme heat or cold (e.g.
in direct sunlight, near a heater or in the car during the day). Place the unit in a secure place to avoid falls.
● Before moving the unit, always unplug all cords first.
● In case of malfunction, unplug the external power supply from the mains. When the unit is not in use for a long
period of time, make sure that external power supply is disconnected from the mains.
● Before connecting the unit to other electronic devices, always switch off and unplug all devices.
● Do not spill liquids on the unit. Do not use any diluents or volatile liquid to clean the unit. Instead, use a soft
slightly damp cloth and allow the unit to dry completely before using again.
● Do not step on or place heavy objects on top of the unit. To avoid hardware damage, handle all buttons,
connectors and switches gently.
