Terra MHD001 Manual Download Page 3

Page: 3 / 12

REQUIREMENTS FOR EXTERNAL POWER SUPPLY UNIT (PSU) FOR MHD001, MHD002

• Output voltage

+12 V

1 V

• Output current

> 0.3 A

• Ripple at single and/or double mains frequency < 10 mV p-p

• Ripple & noise

< 180 mV p-p

• Output connector type

3.5/1.3 (+) plug or 5.5/2.1 mm (+) plug

• Short circuit protection

• Double insulated (marked

)

• Meet EN 55022 class B conducted emisions requirements, measuring with grounded load

Caution (mark on rear side).
Risk of electric shock (mark on rear side).

This product complies with the relevant clauses of the European Directive 2002/96/EC. The unit must be recycled

or discarded according to applicable local and national regulations (mark on rear side) .

Equipment intended for indoor usage only (mark on rear side).

This product is in accordance to following norms of EU: EMC norm EN50083-2, safety norm EN62368-1 and RoHS norm EN50581.

This product is in accordance with Custom Union Technical Regulations: “Electromagnetic compatibility of technical

equipment“ CU TR 020/2011, “On safety of low-voltage equipment“ CU TR 004/2011.

This product is in accordance with safety standard AS/NZS 60065 and EMC standards of Australia.

PACKAGE CONTENTS

1. Encoder-modulator ..........................................................................................1 pcs.
2. DC power supply adapter from 5.5/2.1 mm to 3.5/1.3 mm ..............................1 pcs.

3. Load 75 Ω, type F

...........................................................................................1 pcs.

4. External mains power 12 V 1 A max. (for MHD001P, MHD002P)

......1 pcs.

5. User manual ...................................................................................................1 pcs.

TECHNICAL CHARACTERISTICS

Type

MHD001 MHD001P MHD002 MHD002P

HDMI video input resolution

up to 1920x1080x60p

HDMI video output resolution

up to 1920x1080x60p

H.264 encoder

video encoding standard

MPEG-4 AVC/H.264, Baseline profile 4.0

video output resolution

up to 1920x1080x30p

audio encoding standard

MPEG-1 Layer II, AAC

Transport stream

automatic generation

PAT, SDT, PMTs tables

processing

RF output

DVB standard

DVB-T

frequency range

174 - 230 MHz, 470-862 MHz

MER, typical

32 dB

modulation

QAM64

channel bandwidth

7 MHz/ 8 MHz

shoulder attenuation

> 36 dB

level/impedance

90 dBμV/75 Ω

output level adjustment

-30 dB by 1 dB step

loop through frequency range

45-862 MHz

loop through loss

≤ 2.5 dB

Supply voltage

12 ± 1 V

Current consumption

300 mA

330 mA

Power consumption

100-240 V~

50/60 Hz 4 W

50/60 Hz 4.4 W

Operating temperature

+40

Dimensions/Weight (packed)

133x63x39 mm/0.18 kg (with power supply unit - 0.34 kg)

pr.

software control

pr.

Summary of Contents for MHD001













Search results

Summary of Contents for MHD001

Reviews:

Related manuals for MHD001

Brands by name

Popular brands

Terra MHD001, Manual

Search results

Summary of Contents for MHD001

Reviews:

Related manuals for MHD001

Brands by name

Popular brands