Packing
Reassembling the Bike
1. Place Suitcase Pad into bottom of suitcase.
2. Slide QR Skewers into QR Skewer holders.
3. Place Seatpost on the Suitcase Pad with the Saddle on the right side.
3. Insert the Handlepost between the Seatstays.
4. Place folded bike on top of the Seatpost.
5. Fold Suitcase Pad over top of bottom layer components.
2. Put QR Skewers back in wheels. Remove Frame and Fork Dropout Protectors.
3. Unfold the bike.
4. Re-fit Wheels.
5. Restore Handlepost.
5a. Remove Top Cap.
5b. Connect fork-tube with the Handlepost.
5c. Place the Top Cap in the Handlepost and tighten the Top Cap Bolt to 6-8 Nm.
5d. Make sure the Handlebar and Front Wheel are at right angles.
5e. Tighten the Steerer Clamp Bolts to 10-12 Nm.
6. Restore Seatpost.
7. Refit pedals.
6. Place Rear Wheel facing downward on right side.
7. Fold Suitcase Pad over top of Rear Wheel.
8. Place Front Wheel on Suitcase Pad on left side.
9. Close the suitcase.
5 mm
5 mm
5 mm
1. Remove and unbag bike components from suitcase.
Tern, the Tern Werd (logotype), and the Tern Berd (device), and FlightSuit, used alone or in combination
are trade names, trade devices or registered trademarks of Mobility Holdings, Ltd.
© 2014, Mobility Holdings, Ltd.
ternbicycles.com
