Termozeta MANCHESTER, Instruction Manual

Page: 13 / 16

ASSEMBLY
1. Unscrew washer and screw from the bottom base.
2. Insert the tube into the hole in the upper base.
3. Turn the base upside down so that the tube faces the floor, place the
weight in the center of the base, place the washer and firmly tighten
with the screw.
4. Unscrew the vertical tilt screw and the motor fixing screw from the
unit body.
5. Place the unit body on the extensible tube.
6. Secure the unit body on the extension tube with the screw.
7. Use the motor fixing screw making sure that the head of the screw
matches the seat, then firmly tighten.
8. Tilt the unit body as needed and fix the desired vertical inclination by
tightening the screw.
9. Position the rear grille on the unit body, fixing it with the appropriate
screws.
10. Insert the fan on the motor shaft and tighten it firmly using the pro
vided screw.
11. Lift the clips of the front grille and place it on the rear grille, making
sure that the logo is in a horizontal position parallel to the floor. Once
you have found the right position, secure the front grille to the rear grille
by closing the clips.
HOW TO USE
1. Always ensure that the mains voltage is the same as that indicated on the technical
data label.
2. 2. Turn the speed control to select the speed: 0 (off) and speed 1 (Low), 2 (Medium)
and 3 (High). Press one of the buttons to select the desired speed.
3. 3. Changing the tilt using the tilt adjuster can set the fan to the desired elevation.
4. Never touch the fan with your hands or any object!
5. Do not pull the cable to disconnect the plug from the outlet.