18
materials, surfaces or substances at least 1m from the front of the
product and keep them away from the sides and rear.
40.
Do not use the heater in any areas where petrol, paint or other
flammable liquids are stored e.g. Garages or workshops as a hot,
arcing or sparking parts inside the heater.
41.
This heater is hot when in use. To avoid burns and personal injury, do
not let bare skin touch hot surfaces. If provided, use handles when
moving the product.
42.
Be sure that no other appliances are in use on the same electrical
circuit as your product as an overload can occur.
43.
In case of oil leakage, don’t try to repair but refer only to qualified
technical center.
44.
The heater should not be used in a room, of which the floor area is
less than 5 m
2
.
45.
The cord shouldn’t be placed nearby the
hot surface of the appliance.
NOTE: It is normal when the heaters are turned on for the first time or
when they are turned on after having not been used for a long period
of time the heaters may have noise inside, This will disappear when
the heater has been on a short while.
INSTALLATION
⚫
After removing the packaging materials, check that the appliance is in perfect
condition; if you are unsure, do not use it and ask for qualified professional
help. The packing materials (plastic bags, polystyrene foam, nails, etc.) must
be kept out the reach of children because they are potential sources of danger;
they must be disposed of in accordance with current law.
⚫
Before connecting the appliance, check that the voltage shown on the data
plate matches that of your local power supply and that the electric plug is
grounded. In the event of incompatibility between the electric outlet and the
appliance plug, replace the outlet with another more suitable type by
