ENGLISH
16
3 – WATER HEATING
• Before filling the jar
(7)
, always remove it from base
(11)
and make sure the
power cord plug is disconnected from the power socket.
• Open the lid
(1)
by pressing button
(3)
and fill the tank with fresh water, being
careful to observe the indications of maximum
(8)
and minimum
(9)
levels on the
jar
(7)
transparent window.
• Close the lid
(1)
by pressing it downwards until a click is heard and make sure it
is closed correctly.
• Put the base
(11)
on a flat and stable surface.
• Put the jar
(7)
onto the base
(11)
, insert the plug into the power socket and set
the ON/OFF push button
(4)
to position 1. The LED indicator light
(10)
placed on
jar bottom will turn on lighting up the transparent window.
• The appliance will switch off automatically when the water is boiling. The LED
indicator light
(10)
will turn off and the ON/OFF push button
(4)
will come back to
position 0 automatically.
• If the appliance needs to be switched off before the water has boiled, bring the
push button
(4)
manually to position 0 (off).
• Always remove the jar
(7)
from the base
(11)
before pouring out hot water. Pour
out hot water keeping lid
(1)
closed.
4 – CLEANING AND MAINTENANCE
ATTENTION!
Before carrying out any cleaning and/or maintenance operations,
disconnect the plug from the power outlet
and wait until the
appliance has cooled off.
SUGGESTIONS:
The appliance cleaning will be easier if it is carried
out immediately after use.
To clean the outer surfaces of the appliance, use a soft damp cloth and dry
thoroughly. To clean the jug inner part, use a soft damp cloth or a non-abrasive pad.
To clean filter
(2)
, open the lid
(1)
and remove the filter
(2)
from the appliance, then
rinse it under running water and dry it thoroughly before fitting it back onto the jug.