18
4 - MAINTENANCE
Before undertaking any maintenance,
disconnect the device from the electricity and water supply!
Periodically check the efficiency of the heating system and the correct functioning of the fan. Keep the machine
clean and prevent the accumulation of dirt. Periodically clean the internal grill and the generators’ body.
4.1 Cleaning
Periodically perform the following operations by ensuring that the machine is disconnected from the mains and
the gas supply is interrupted. Make sure the device is cold before cleaning.
Keep the body of the device and engine clean, by regularly using a soft mild cloth and a non-toxic and solvent-
free detergent. Do not rub too tightly and do not spill water on the components.
Do not use solvents.
In the presence of unusual noises and vibrations, check the tightness of screws and bolts.
Use only original spare parts by Termotecnica Pericoli s.r.l.
4.2 Replacement or cleaning of the nozzle
After making sure that the machine is stopped and cold, disconnect the
electrical and gas supplies. Remove with a hex wrench #7, the 4 screws
holding the safety net on the generator’s aspiration inlet.
With a 13mm hex wrench, unscrew the nozzle (fig.4.1), being careful
not to drop it into de burner or the machine (eventually, cover the hole
temporarily).
Replace the old nozzle with a new one.
Verify the gas pressure before restarting the device.
Check that the flame is stable and with a blue coloring.
If the flame burns yellow (or the flame is not stable), calibrate the valve.
Note the change on the label (near the gas supply connection)
NOZZLES
easyTERM-80
LPG
Nat.GAS
Code
0F.8101502 (L410)
0F.8101552 (L650)
Ø mm
4,1 6,5
Fig.4.1
4.3 Accessories
A complete range of accessories for
easyTERM
is available; ask your local dealer about the accessories
catalogue.
Nozzle
Nozzle holder
Burner’s
main body
