1.4
Before connecting the power supply, make sure that the power supply matches the rated
power supply of the product.
Cable Selection of the Protection Device
Model
Breaker
Residual-current circuit breaker
Rated residual leakage current
Fuse
Power Cord
（
MM2)
※
Above data is subject to modification without notice.
Note: The above data is adapted to power cord ≤ 10m. If power cord is
must be increased. The signal cable can be extended to 50m at most.
Pay attention:
Please ensure the safety of
the power plug.
Otherwise, it could cause
electric shock or fire.
After all connections are complete and checked, perform the following steps:
1) The user should start the water pump first to ensure no water leakage in the water pipe
system; then set the thermostat at the appropriate temperature after power on.
2) In order to protect the machine, it h
pump start, next fan runs, and the compressor will start up automatically after about 3
minutes
3) Check if there is any abnormal noise when running
4) Check that the set temperature is appropriate
6
Power Supply
Before connecting the power supply, make sure that the power supply matches the rated
power supply of the product.
the Protection Device
SHP03 SHP05
current circuit breaker
4.5
8.0
Rated residual leakage current
30
30
4.5
8.0
3×1.5
3×1.5
Above data is subject to modification without notice.
Note: The above data is adapted to power cord ≤ 10m. If power cord is
must be increased. The signal cable can be extended to 50m at most.
Do not disconnect the power
supply while the machine is
running
Otherwise, it could cause an
electric shock or fire.
Do not use damaged or
substandard wires.
Otherwise, it could cause
an electric shock or fire.
complete and checked, perform the following steps:
The user should start the water pump first to ensure no water leakage in the water pipe
system; then set the thermostat at the appropriate temperature after power on.
In order to protect the machine, it has a delayed start function, after start up, the water
pump start, next fan runs, and the compressor will start up automatically after about 3
Check if there is any abnormal noise when running
Check that the set temperature is appropriate
Before connecting the power supply, make sure that the power supply matches the rated
SHP05 SHP06
9.0
30
9.0
3×1.5
3×1.5
Note: The above data is adapted to power cord ≤ 10m. If power cord is
＞
10m, wire diameter
must be increased. The signal cable can be extended to 50m at most.
Do not use damaged or
substandard wires.
Otherwise, it could cause
an electric shock or fire.
complete and checked, perform the following steps:
The user should start the water pump first to ensure no water leakage in the water pipe
system; then set the thermostat at the appropriate temperature after power on.
as a delayed start function, after start up, the water
pump start, next fan runs, and the compressor will start up automatically after about 3
Summary of Contents for HidroTerm SHP03
Page 2: ......
Page 28: ...1 Version Dg9MinR32 ...
