27
1.
Unscrew two nuts fixing the clamp
(figure15.I), and disassemble it and distance
bushings.
2.
Remove the glass from the stop.
3.
Take new glass and if it doesn’t have thread
sealing tape stick them: tape of 20 mm in
width is stuck from the top and from below
the glass, in a «П» shape (figure 16.I), tape
of 10 mm in width is stuck vertically, along
the lateral sides of the glass (figure 16.II).
4.
Insert the glass into the stop, at that the tape
stuck from the lateral sides (vertical) shall be
pressed between the glass and the door frame
(figure 16.II).
5.
Fix the glass with the clamp and tighten the
clamp with nuts.
Figure 15. Repair of translucent screen of «Vitra»
model door
ATTENTION! Nuts fastening the clamp are screwed to the mounting bolts through the
remote plugs (Figure 16.1).
Figure 16. Fastening of translucent screen of the «Vitra» model door
