TOUCH CONTROL AND REMOTE CONTROL OPERATION
Operation for Touch Control
Insert the plug in a suitable power socket. The touch screen buttons located on the pro
-
duct correspond to the remote control functions:
Display
PR sensor
Signal Control of Wi-Fi
Power
Mode
Temperature
change button
Timer
Power
When the product is on, press „ ”. The upper part of the display shows temperature.
The heater is working at low power heating conditions.
Mode
By pressing this button, you can change the heating modes by pressing once. The relevant
icons will appear on the display: – 50%, – 100%. This button is also used as a
child lock. To activate the button lock / child lock, press it and hold it for about 5 seconds.
Temperature change button
°C
Press temperature button
°C
, the temperaturę can be set from 5 °C to 40 °C. Internal
temperature is displayed every time the appliance is starte dup. The temperature can be
set when the appliance is in stand-by or heating. When the room temperature reaches
the set level, the high temperature power stops and the low temperature power remains
active. When room temperature is 2 degrees over the set temperature, both the high and
lower temperature powers will stop operating. The machine will begin operating again
only when temperature decreases 2 degrees with respect to the set temperature.
