MAINTENANCE AND STORAGE
Maintenance of the main body
●
During maintenance, remember to remove the plug
from the power supply socket. The plug must not
be removed with damp hands.
●
Do not carry out maintenance until the appliance has
completely cooled down.
●
During maintenance do not dampen the appliance or
spray water onto it.
●
To clean the main body of the heater and the reflector,
use a piece of soft cloth. Should the surface needing
cleaning be very dirty, dampen the cloth with warm
water or with a neutral / delicate detergent before
cleaning; at the end of this operation, use a piece of
soft and dry cloth to remove the excess humidity.
●
Do not apply diluents, petrol, alcohol, kerosene,
benzene, abrasive powders, alkaline detergents, rigid
brushes, or similar material to the paint or to the
coating resins.
●
Should both dust or humidity be found in correspondence
with the junction between plug and socket, caused by
prolonged use, remove and clean the plug using a
piece of dry cloth, then insert it again.
Storage
Put the heater in its packing or in a box and stored in a dry place.