Termo 562100, Instruction Manual

Page: 11 / 33

GB INSTRUCTION MANUAL
20
IMPORTANT NOTES
• Do not use the machine when the environmental temperature is over 35°C or below 5°C.
• Pour the water when the water tank is full and the indicator will become red. Then
put the water tank to the original place so that the machine can work again.
• Restart the machine after at least 3 minutes when it stopped in order to avoid to
destroy the compressor.
WATER DRAINAGE MANUALLY
- WATER FULL
1 The compressor and motor will stop when
the water tank is full and the red indicator
light will be on.
2 Take out the water tank and then pour the
water off.
3 Put the water tank to the original place and
the machine will automatically resame its
operation (three minutes delay self-protect
for compressor after stop).
WATER DRAINAGE CONTINUOUSLY
1 Cut off the power.
2 Cut the three seal of continuous drainage hose.
3 Connect the water pipe of inner diaineter (thickness = 9mm*2mm)
to the drain hose)
4 Route the other end of the hose into a drain that is deeper than the water outlet.
AUTO DEFROST FUNCTION
Temperature drops below 20⁰C this unit will defrost automatically and the display will
be showing indication P1 lasts approximately 5-8 minutes.
21
GB INSTRUCTION MANUAL
Note: Caution: To avoid unexpected accident, unit must be disconnected
from power supply before maintenance.
A. Clean the Air Filter
Air filter gathers dust and is easily be obstructed, to achieve the best operating effi-
ciency, regular clean is necessary. Clean the filter every 1 to 5 days if ambient space is
dusty. Clean the filter every month if ambient space is reasonably clean.
How to clean air filter:
a. Pull out the air filter (as following illustration).
b. Suck the dust on the surface of air filter with vacuum, or wash it with warm water
(not high than 40°C)
c. Make the filter dry (by airing or shake it), install it in machine.
Filter should not be baked by fire or under the sun for many times.
CARE AND MAINTENANCE
Plastic
washable
filter
Filter
frame