Section 1. Installation
1.1. Appliance Dimensions
The following dimensions are supplied for guidance purposes only. You
should accurately measure your appliance and cabinetry before
commencing installation
Dimensions shown are in mm
Your hob is supplied with a fixing kit and seal to ensure that the hob is
securely fitted/sealed to the work surface.
1.2. General Installation Advice
The Law states that gas appliances must be installed by a fully
qualified Gas Engineer!
��
R em ove all packaging m aterials and any protective film applied to the
appliance surfaces.
��
W ipe the stainless steel s urface w ith a soft dam p cloth.
��
The kitchen/room where this appliance is to be installed must have
adequate ventilation. Your Gas Engineer will inspect the room and
advise you accordingly.
��
A cooker hood may be installed above the hob.
��
A minimum distance of 650mm must be maintained between the hob
and a cooker hood positioned directly above.
5
-
-
1
2
3
4
260
480
Summary of Contents for 17056
Page 8: ......
