-
When opening the appliance door, take care to avoid skin contact with any
steam that may escape from the oven.
-
Perishable food, plastic items and aerosols may be affected by heat and should
not be stored above or around the appliance.
Service :
-
Connection cables of appliances near oven can be damaged and shortcutted if
they contacted with hot parts of oven. Thats why, cables of other appliances
be in enough safety distance to oven. When power cord damaged plese contact
with closest authorised service to fix new one.
-
Operations and repairs on appliance that done unmethodically causes possi
of electric shock and shortcuts. Please keep away from this kind of operations
which can destroy your appliance and cause danger of getting injured.
-
This appliance should only be repaired or serviced by an authorised Service
Engineer and only genuine approved spare parts should be used.
SECTION 3 INSTALLATION of BUILT-IN OVEN
�
nstallation must be done by an authorised technician. Below instructions
will guide an authorised technician to install Built-in oven according to law
standarts to be in force.
Instructions :
-
Dimensions and material of Cabin or cupboard that built-in oven will install in
must be suitable and endurable for heat increases.
-
In a right installation operation, it is required to prevent any contact with
electrical parts or isolated parts due to work aim.
Isolation materials or parts that used for isolation must affix strongly to prevent
taking out by any tool.
-
It is not recommend you to install your appliance near refrigator or deepfrost.
Otherwise performance of these appliances effected badly because of heat
spreaded..
-
If a cooker installed on your oven, electrical cables of cooker and oven must
be seperated due to safety and to make dismantling easy if it requires.
-
Install your appliance in a position that lets you to reach feeding cable.
-
Do not place feeding cable close or contacted to hot surfaces. Do not tighten
the cable to oven door.
Measures of Built-in oven and board of oven are at Figure.3 & 4
Installed Built-in Oven pictures are at Figure.5 & 6
Figure.6
Figure.5
SECTION 4 INTRODUCTION of CONTROL PANEL
You can find control buttons in Figure.5 With these control buttons
power of each heating element can be adjustable. Buttons can turn
clockwise or opposite to clockwise directions. Please bring the control
button to required cooking position and do not forget big numbers on button
print means high heat outlet. For first cooking, it recommended to use
highest cooking position.
Instructions :
6-
-
When opening the appliance door, take care to avoid skin contact with any
steam that may escape from the oven.
-
Perishable food, plastic items and aerosols may be affected by heat and should
not be stored above or around the appliance.
Service :
-
Connection cables of appliances near oven can be damaged and shortcutted if
they contacted with hot parts of oven. Thats why, cables of other appliances
be in enough safety distance to oven. When power cord damaged plese contact
with closest authorised service to fix new one.
-
Operations and repairs on appliance that done unmethodically causes possi
of electric shock and shortcuts. Please keep away from this kind of operations
which can destroy your appliance and cause danger of getting injured.
-
This appliance should only be repaired or serviced by an authorised Service
Engineer and only genuine approved spare parts should be used.
SECTION 3 INSTALLATION of BUILT-IN OVEN
�
nstallation must be done by an authorised technician. Below instructions
will guide an authorised technician to install Built-in oven according to law
standarts to be in force.
Instructions :
-
Dimensions and material of Cabin or cupboard that built-in oven will install in
must be suitable and endurable for heat increases.
-
In a right installation operation, it is required to prevent any contact with
electrical parts or isolated parts due to work aim.
Isolation materials or parts that used for isolation must affix strongly to prevent
taking out by any tool.
-
It is not recommend you to install your appliance near refrigator or deepfrost.
Otherwise performance of these appliances effected badly because of heat
spreaded..
-
If a cooker installed on your oven, electrical cables of cooker and oven must
be seperated due to safety and to make dismantling easy if it requires.
-
Install your appliance in a position that lets you to reach feeding cable.
-
Do not place feeding cable close or contacted to hot surfaces. Do not tighten
the cable to oven door.
Measures of Built-in oven and board of oven are at Figure.3 & 4
Installed Built-in Oven pictures are at Figure.5 & 6
Figure.6
Figure.5
SECTION 4 INTRODUCTION of CONTROL PANEL
You can find control buttons in Figure.5 With these control buttons
power of each heating element can be adjustable. Buttons can turn
clockwise or opposite to clockwise directions. Please bring the control
button to required cooking position and do not forget big numbers on button
print means high heat outlet. For first cooking, it recommended to use
highest cooking position.
Instructions :
6-
