8
come you should try to avoid touching the varnished surfaces when
the stove is hot. Make sure to have sufficient ventilation when using
spray paint.
Glass
normally does not need any maintenance apart from clea-
ning. This is most easily done by using TermaTech’s glass cleaner.
Remember only to use glass cleaner when the stove is cold. Glass is
made of ceramic glass, be sure of environmentally disposal.
Original parts
which need to be changed due to wear can be found
at your dealer. Because of fit etc. only original parts from TermaTech
should be used.
Right to claim compensation for defective product is under
current law
. When stating deviations the use of the product must
be suspended immediately and the dealer must be contacted.
Chimney/Flues Must be swept on regular occasions, as per manufac-
turers recommendations.
5 YEAR WARRANTY* /
RIGHT TO INVOKE LACK OF CONFORMITY
If defects/faults are ascertained, use of the wood burner must be
stopped immediately and the dealer contacted.
*5 Year warranty
Provided that there has been normal operation of the wood burner,
TermaTech offers a 5 year warranty on material and manufacturing
faults on the load-bearing frame, exclusive of the combustion cham-
ber.
Combustion chamber:
The following parts are not covered by the
warranty: The combustion chamber, Cast iron parts (bottom, door
and grate), Insulation material (vermiculite plates), Smoke deflector
plates, Glass, gaskets as well as the closing mechanism/handle.
Exterior parts:
The following parts are not covered by the warran-
ty: Varnished plates/surfaces, stone facings, glazed tiles, concrete
and glass as well as the closing mechanism/ handle
The warranty does not cover faults which are due to:
•
the user/mounting guide not being followed
•
the mounting being carried out incorrectly
•
overheating/deterioration of the materials, caused by the use
of, for example, the incorrect type of fuel, petroleum coke or too
much fuel
•
the product has been connected to a chimney with poor drawing
qualities, for example, chimneys that are too short or are leaking
•
the product being positioned or has been positioned/kept in un-
heated or damp surroundings
•
the product being in bad repair or not maintained in accordance
with the instructions
•
normal wear and tear of wearing parts/expendable items as well
