To start exploitation of BIOFEEDBACK system the sensor must be placed in the dedicated place on the
device.
If the information about lost connection with the sensor appears in the application, it is advised to check
the % of the battery left because the reason of lost connection can be too low battery level.
5.
Setting up
During the first set up of the system the connection of the devices takes place – the sensor and the
application on the tablet. This process is performed only once during the first set up of the system and
does not need to be repeated.
Connection couples the sensor with the mobile device. To reset the settings the application needs to be
uninstalled on the tablet and installed again to repeat connecting the devices.
To connect the sensor and the application, the four last numbers of MAC address are needed. They can
be found on the device’s CE label and in the user guide.
UWAGA!
Zamocowanie czujka w niewłaściwym kierunku uniemożliwi poprawne korzystanie z aplikacji.
U
WAGA!
Zamocowanie czujka w niewłaściwym kierunku uniemożliwi poprawne korzystanie z aplikacji.
ATTENTION! Installation of the sensor in the wrong place will disable the proper
usage of the system!
ATTENTION! The sensor signalizes the battery level by presenting the % left to the
battery discharge. To support the continuous support of the battery, it is advised to
chargé the battery when it’s level reaches 15% power and when the device is not
exploited by a patient.
