73S1215F Evaluation Board User Guide
UG_1215F_039
8
Rev. 1.8
2.1 Connecting the Evaluation Board with an Emulation Tool
The 73S1215F Evaluation Board can operate with an In-Circuit-Emulator (ICE) from Signum Systems
(model ADM-51).
shows the connections between the ICE and the evaluation board. The
Signum System pod has a ribbon cable that must be directly attached to connector J11.
Signum Systems offers different pod options depending on user needs. The standard pod allows users to
perform typical emulator functions such as symbolic debugging, in-line breakpoints, memory examination
and/or modification, etc. Other pod options enable code trace capability and/or complex breakpoints at an
additional cost.
Figure 3: 73S1215F Evaluation Board Basic Connections with ADM-51 ICE
http://www.datasheetcatalog.com/
