Care and Maintenance
7
97/112
TL160
Operating Manual 12.9.08 Version 1.0
7.8.14.2
Differential of rear axle with
transmission
Checking the axle oil level
•
Park the machine on level ground.
•
Remove the inspection-filling plugs (74/1).
•
Check if the oil is up to the edge of the inspection-
filling hole.
•
Top up oil if required.
•
Carefully close the inspection-filling plugs.
Changing axle oil
•
Park the machine on level ground.
•
Clean the area around the inspection-filling plugs
(74/1) and drain plugs (74/2).
•
Open the inspection-filling plugs (74/1).
•
Open the drain plugs (74/2) on the differential and
brake housings and drain oil.
•
Flush out the axle if necessary.
•
Carefully close the drain plugs.
•
Pour in oil using the inspection-filling hole until oil
escapes from the other inspection-filling hole.
•
Carefully
close the inspection-filling plugs.
Checking the transmission oil level
•
Park the machine on level ground.
•
Remove the inspection plug (75/1).
•
Check if the oil is up to the edge of the inspection
hole.
•
Top up oil if required.
•
Carefully close the inspection plug.
Fig. 74
Checking / replacing the rear axle oil.
Attention
• Collect the waste oil in a suitable container
and dispose of in compliance with
regulations.
Fig. 75
Checking the transmission oil
Summary of Contents for TL160
