Terex TL160, Operating Manual

Page: 43 / 114

Operation 4
43/112 TL160 Operating Manual 12.9.08 Version 1.0
4.5 Heating / Ventilation / Air-
conditioning
Button assignment of operator control panel
• The heating is connected to the coolant circuit.
ON/OFF/Circulating air button (14/63c)
The control unit is switched on and off by pressing the
button. If the control unit is switched off, all functions
such as heating and ventilation are deactivated. If the
LED under the button lights up, recirculation mode is
activated. If the LED does not light up, fresh air mode
is activated.
Display (14/63g)
The display shows the relevant temperatures or
trouble codes in case of malfunction.
Heating
Inside-outside temperature button (14/63d)
The inside temperature is shown on the display for
approx. 6 sec by pressing the button (14/63g). The
cabin temperature is measured by the interior
temperature sensor (14/63l). If the air-conditioning
unit is in cooling-air mode, the outside temperature is
shown on the display for approx. 6 sec by pressing
the button (14/63g).
Temperature preselection buttons (14/63e
63f)
Each time the button is pressed (14/63e), the
temperature increases by 1°C. Each time the button
is pressed (14/63f), the temperature decreases by
1°C down to the outside temperature at most.
Ventilation
Fan indicator (14/63h)
The LEDs in the fan symbol indicate the momentary
fan speed.
Fan speed buttons (14/63i 63k)
Each time the button is pressed (14/63i), the fan
speed increases by one step. Each time the button is
pressed (14/63k), the fan speed decreases by one
step.
• The air is distributed by adjusting the air vents.
Fig. 14 Heating and ventilation
00014,0 h
12 Km/h
0 4/4
1/2
+
-
P
63
63b 63a 63c
63d
63e
63f
63g
63h 63i
63k
63l
AUTO
OFF
22
MED
HI
LO
OFF
22