Terex SK315 Technical Tips Download Page 3

Page: 3 / 4

Proximity Switch Failure Message on Display

•

There are two ways in which the operator will receive this error message.

•

The first is with a long jib configuration swinging in first step into the wind.

The crane

doesn’t

gain momentum within the time period set in the

PLC parameters (2 seconds) that is expects to see the signal from the
proximity switch.

TECHNICAL TIPS
CRANES

If you have any doubts about how to perform any procedure, please contact our Technical Support team through our Web Portal

www.myterexcranes.com and access our Livechat.

Summary of Contents for SK315

Page 1: ...Slow Control Functions Personal Observation Multimeter Basic Hand Tools SK315 SK405 SK415 SK565 SK575 Necessary Tools Type of Tip Applicable Models TECHNICAL TIPS CRANES ...

Page 3: ... in first step into the wind The crane doesn t gain momentum within the time period set in the PLC parameters 2 seconds that is expects to see the signal from the proximity switch TECHNICAL TIPS CRANES If you have any doubts about how to perform any procedure please contact our Technical Support team through our Web Portal www myterexcranes com and access our Livechat ...

Page 4: ...a signal from the proximity switch at input E10 8 As the crane swings this input will flasn ON and OFF as the proximity switch passes the gear teeth of the swing bearing exterior race TECHNICAL TIPS CRANES If you have any doubts about how to perform any procedure please contact our Technical Support team through our Web Portal www myterexcranes com and access our Livechat ...