- Allows for tests on moist and dry
surfaces;
- Direct reading of the galvanometer,
indicating APPROVED or
DISAPPROVED;
- Packed in a wooden housing;
Approximate weight without
packaging: 5.30 kg
Figure 3 - Commands
NOTE: The Ritz Tester WD models and
5 - Potentiometer for calibration
their respective voltage ranges can be
6 - Gauge light
viewed on Table 1:
7 - Selector switch
5. IDENTIFICATION
The Ritz Tester WD ID is displayed on a
label as in Figure 4.
Table 1 - Terex catalog reference
4. PANEL DESCRIPTION
Figure 4 - Identification label
Cat. No.
- Reference number from Terex catalog
Serial No.
Figure 2 - Galvanometer panel
- Serial number of the instrument;
1 - Calibration line
2 - Green section: APPROVED
3 - Red section: DISAPPROVED
4 - End of scale
PORTUGUÊS
TEREX
17
MI0018-rev00
Instrument
Voltage Range
LS-80/WD
Wet/Dry, for 110 V
LS-81/WD
Wet/Dry, for 220 V
1
4
3
2
5
7
6
