Operator's Manual
Third Edition • Sixth Printing
Work Area Safety
12 GTH-844
Part No. 237108
Falling Object Hazards
Operate the machine at speeds that will keep the
load under control. Start and stop movements
smoothly.
Keep people, equipment and
material out of the work area.
Do not operate the machine
while people are under or near
an elevated boom, whether it is
loaded or unloaded.
Be sure the load is secure before lifting it. Always
make sure the quick attach pin is inserted and
secured.
Bodily Injury Hazards
Always adjust the seat and
fasten the seat belt before
starting the engine.
Do not operate the machine
with a hydraulic oil or air leak.
An air leak or hydraulic leak
can penetrate and/or burn skin.
Relieve pressure before
disconnecting hydraulic lines.
Keep away from leaks and pin
holes. Use a piece of
cardboard or paper to search
for leaks. Do not use your
hand.
Fluid injected into skin must be surgically removed
within a few hours by a doctor familiar with this
type of injury or gangrene will result.
Stay clear of belts and fans
when the engine is running.
Always operate the machine in a well-ventilated
area to avoid carbon monoxide poisoning.
Improper contact with components under any
cover will cause serious injury. Only trained
maintenance personnel should access
compartments. Access by the operator is only
advised when performing a pre-operation
inspection. All compartments must remain closed
and secured during operation.
Keep body parts, such as hand, fingers and arms,
away from moving components.
Always use provided latches and handles for
opening and closing doors and covers.