Terex Genie GS-4655, Operator'S Manual

Page: 52 / 59

Operator's Manual First Edition • Third Printing
Transport and Lifting Instructions
50 GS
™
-4655 Part No. 1294978GT
Brake Release Operation
1 Chock the wheels or
tracks to prevent the
machine from rolling.
2 Be sure the winch line is properly secured to
the drive chassis tie points and the path is
clear of all obstructions.
3 Pull out the red Emergency Stop button at
both the ground and platform controls and
position the key switch to ground mode.
4 Open the hydraulic tray.
5 Remove the protective cover
from the toggle switch.
6 Move the toggle switch as
indicated in the image to
engage the brakes. The alarm
will turn on when the brakes
are released.
After the machine is loaded:
1 Chock the wheels to prevent the machine from
rolling.
2 Move the toggle switch as
indicated in the image to engage
the brakes.
3 Place the protective cover on the
toggle switch.
4 Push the red Emergency stop button at both
ground and platform controls to off position.
Towing the Genie GS-4655 is not recommended.
If the machine must be towed, do not exceed
2.5 mph/4 km/h.