Terex Evoquip Bison 120, Operation Manual

Page: 54 / 224

5 Transportation
Operations Manual
Bison 120
20-07-2018
Page 5-2
Revision 2.0
5 Transportation
n
WARNING
Nip Point Hazard.
Nip points exist where pins and rams need to be reconnected.
Moving Object Hazard.
When lifting any heavy sub assemblies there is always risk of the object unexpectedly moving.
Ensure adequate distance is kept from the assembly when being raised from the ground. Failure
in doing so may result in serious injuries.
Injection Hazard.
Fluid escaping under pressure can penetrate skin and result in death or serious injury.
Relieve pressure before disconnecting hydraulic lines.
Stay clear of leaks and pin holes. Use a piece of cardboard or wood to search for leaks. Do not
use hand.
Fluid injected into the skin must be surgically removed within a few hours by a doctor familiar with
this type of injury, or gangrene will result.
Always wear appropriate personnel protective equipment.
n
CAUTION
Ensure that a full and thorough risk assessment has been carried out prior to carrying out any
disassembly/ reassembly of the machine.
NOTICE
Prior to transportation always check the machine for loose and/or damaged components. Fasten
all loose parts, replace missing items or make repairs as found necessary to ensure that all
components are safely secured during transportation.
When transporting the machine, it is the responsibility of the haulage contractor to ensure the
machine is correctly secured to the transporter.