The anchor must be capable of holding up to 2,500 lbs. of force
TECH TIP 11 | RELEASED 02.28.2022 | VERSION 1.0
STEP 1: Set-up
Bring the unit up to operating temperature. Operate the rotation for several revolutions in each
direction to prime the hydraulic lines. Locate a suitable anchor capable of holding 2500 lbs. in an
area with no overhead obstructions. The area on each side of the anchor must be clear to be able
to position the boom on both sides and apply side load. Position and set up the truck near the
anchor so the load line can be positioned to pull with the side pull attachment at 300 inches from the
centerline of rotation except on the General 95.
Test Set-up - All units except General 95
PAGE 6 OF 15
