Terbly BPAR5QB-R, User Manual

Page: 22 / 27

BPAR5QB-R User Manual XM1164-V1.0-NR 21
10.3.5. WhiteBla
6. Access the main menu.
7. Tap the <Up/Down>button until
“
WhiteBla
”
is displayed.
8. Press ENTER, the display will show
“
WhiteBla
”
.
9. The display show “ ON ” ,Press <Up/Down>, the display will show “ OFF ” .
10.
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
10.3.6. WDMX
From factory, this projector is prepared for wireless data transmission (W-DMX). If you wish to
de-activate W-DMX control, you can select the function “De-activate WDMX” by turning the
encoder. With the function “rest”, you can log out the projector from the wireless sender.
1 ． Access the main menu.
2 ． Press <Up/Down>, the display will show “ WDMX ” .
3
．
Press< ENTER>, the display will show
“
WDMX
”
.
4
．
The display show
“
ActWDMX
”
, Press <Up/Down>, the display will show
“WDMXOff”, “AcDaOut” or “ClrWDMX”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
10.3.7.
ResetDef
With this function, you can select restore factory set for ON or OFF, the default is OFF.
1 ． Tap <MODE/ESC>button ， access the main menu ， Tap the <Up/Down>button until
“
Personality
”
is displayed. Press ENTER, the display will show
“
Personality
”
.
2
．
Press <Up/Down>, the display will show
“
Reset Default
”
.
3 ． Press< ENTER>, the display will show “ Reset Default ” .
4
．
The display show
“
OFF
”
,Press <Up/Down>, the display will show “ON”, “PassCode”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
10.4. ManCntrl
10.4.1. ManCntrl
With this function, you can adjust the lamp more easily. All effects will be canceled, the shutter
opens and the dimmer intensity will be set to 100 %. With the individual functions, you can
focus the light on a flat surface (wall) and erform the fine lamp adjustment.
1. Access the main menu.
2. Press <Up/Down>, the display will show
“
ManCntrl
”
.
3. Press< ENTER>, the display will show “ ManCntrl ” .
4. The display show “ Auto ” , “ Red ” , “ Gree ” , “ Blue ” , “ Whit ” , “ Stro ” , “ Dimm ”
“ Macr ” , “ Temp ” .
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
10.5. Mode Set
10.5.1. UserMode
With this function, you can create user defined channel orders.
1. Access the main menu.
2. Press <Up/Down>, the display will show “ UserMode ” .
3. Press< ENTER>, the display will show
“
UserMode
”
.
4. The display show
“
4
”
,Press <Up/Down>, the display will show “5”, “11” , “12”.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.