manualshive.com logo in svg

Terason t3000, User Manual, Page: 37 / 421

Share
Download
Terason t3000 User Manual Download Page 37

Terason t3000 / Echo Ultrasound System User Guide

37

2   Installing Software

When you purchase the Terason Ultrasound System, it comes with all the required 
software already installed on the laptop. You may never need the information in this 
chapter unless you upgrade your system, or if you want to install the Terason Ultrasound 
System on a computer that was not provided by Terason.

If you must install, uninstall, or configure part of the Terason Ultrasound System, 
instructions for the following operations are included in this chapter:

•

Installing Terason Software 

on page 37

•

Upgrading Terason Software 

on page 39

•

Uninstalling Terason Software 

on page 41

•

Installing the FireWire Terason Transducer Driver 

on page 42

•

Installing the Terason DICOM Utility 

on page 44

•

Licensing the Terason Software 

on page 50

For information on connecting hardware components, or if you must reinstall the 
computer’s operating system, refer to the Configuration Guide that came with your 
system.

Installing Terason Software

Terason Ultrasound System are shipped with all required software installed on the laptop. 
You do not need to complete the following procedure unless you want to install the 
Terason Ultrasound System on a computer that was not provided by Terason.

When ready, complete these steps:

1.

Exit all applications including email, and 

unplug

 the Terason engine from the laptop 

if it has already been installed.

2.

Insert the 

Terason CD

 into the CD-RW drive. An InstallShield message displays as it 

prepares to install the software, then the Welcome dialog box opens.

3.

Click 

Next>

. The License Agreement dialog box appears. Read the License 

Information carefully.

4.

Click 

Yes

. The Choose Destination Location dialog box opens.

Summary of Contents for t3000






































































































































































































































































































































































































































Reviews:

No comments